美国伯乐mp3电泳槽 操作方法
Gel Cassette Preparation1
1. Place a Short Plate on top of the Spacer Plate.
2. Slide the two plates into the Casting Frame, keeping the
Short Plate facing front. Insure both plates are flush at the
bottom on a level surface.
3. Lock the pressure cams to secure the glass plates.
4. Engage the spring loaded lever and place the gel cassette
assembly on the gray casting stand gasket. Insure the
horizontal ribs on the back of the Casting Frame are flush
against the face of the Casting Stand and the glass plates
are perpendicular to the level surface. The lever pushes
the Spacer Plate down against the gray rubber gaskets.
1 Please refer to the instruction manual for further explanationand technical
notes.
Mini-PROTEAN® 3 Cell Assembly Guide
Mini-PROTEAN 3 Electrophoresis
Module Assembly
1. Remove the Gel Cassette Sandwich from the Casting
Frame.
2. Place the Gel Cassette Sandwich into the Electrode
Assembly with the Short Plate facing inward.
3. Slide Gel Cassette Sandwiches and Electrode Assembly
into the clamping frame.
4. Press down the Electrode Assembly while closing the two
cam levers of the Clamping Frame.
5. Lower the Inner Chamber into the Mini Tank.
Life Science
Group
Web site www.bio-rad.com USA(800) 4BIORAD Australia 02 9914 2800 Austria (01)-877 89 01 Belgium09-385 55 11 Brazil 55 21 507 6191
Canada China 86-10-8201-1366/68 Denmark Finland France 01 47 95 6965 089 318 84-177
Hong Kong 852-2789-3300 India (91-124) 6398112/113/114 Israel 03951 4124 Italy 34 91 590 5200 Japan 03-5811-6270 Korea82-2-3473-4460
Latin America 305-894-5950 Mexico 52 5 534 2552 to 54 TheNetherlands New Zealand 64-9-4152280 47-23-38-41-30
Russia 7 095 979 98 00 Singapore 65-2729877 Spain 34-91-590-5200Sweden 46 (0)8-55 51 27 00 Switzerland 061-717-9555 United Kingdom0800-181134
Bulletin 0000 US/EG Rev A 00-000 0000 Sig 0101
Bio-Rad
Laboratories, Inc.
4006158 Rev B
以上信息由企业自行提供，该企业负责信息内容的真实性、准确性和合法性。仪表展览网对此不承担任何保证责任。
Copyright@ 2003-2009
北京亚平宁生物科技发展有限公司上海办版权所有
粤ICP备08118721号 网站管理入口